Requires EIA standard 4-post rack with 3/8" square holes at 5/8" spacing (pitch.) Not compatible with vertical mounting rails with threaded holes. Not compatible with 1/2" hole spacing (pitch). Please consult a qualified tradesperson if you are unsure of your installation.
Telescoping slides fit rack depths between 28" - 34" (inside, front-to-back dimension of the vertical rack posts)
Side Clearance: 9.5mm
8300 systems are shown for display purposes and are not included in the cost of the kit
Minimum slide dimensions without appliance installed:
28” x 1.6”
711 mm x 41 mm
5.44 lbs / 2.46 kg
Dimensions with appliance mounted (slides retracted and secured):
19 x 13 x 1.72 inches*
482.6 x 330 x 43.8 mm *excluding system handles, and hot-swap PSU protrusions
WARRANTY AND SUPPORT INFORMATION:
One-year manufacturer's warranty.
All specifications subject to change without notice.
PRO TIP
Take a photo of the label on the bottom of your Netgate 8300 before installation. It is always a good idea to make a note of serial numbers and additional information from the label on the bottom of your system before installing in a server rack. The labeling may be difficult to read while the system is mounted in the rack. Please take a picture of the information or write it down for future reference.
OVERVIEW
Improve the accessibility of your Netgate rackmountable appliances with this easy-to-install sliding rail kit.
Makes it easier to install and access your 1U rackmounted system
Tool-less slides attach in seconds to integrated system chassis standoffs
Rail brackets snap into 3/8” square holes on 4-post rack without tools
Ball bearings provide a smooth, quiet movement and long life
Maximum system slide travel 19.56”
Telescoping rail brackets fit rack & cabinet depths between 20.9” and 28”
UL rated for system weight up to 100 lbs
Constructed with RoHS compliant zinc electroplated steel
KIT INCLUDES:
1x pair of steel sliding rail brackets (1x left side bracket, 1x right side bracket)
10x M4-0.7 x 4mm screws* for locking the inner slide member to the chassis. *optional on some appliances
4x M5-0.8 x 15mm screws for securing system ears to 19in vertical rack posts
4x EIA square hole adapters (U-shaped brackets convert round hole post to EIA square hole posts)
12x M5-0.8 x 15mm shoulder screws for mounting EIA square hole adapters and system ears with round hole posts
Requires EIA standard 4-post rack with 3/8" square holes at 5/8" spacing (pitch.) Must use EIA square adapter for vertical mounting rails with threaded holes. Not compatible with 1/2" hole spacing (pitch). Please consult a qualified tradesperson if you are unsure of your installation.
Telescoping slides fit rack depths between 20.9" - 28" (inside, front-to-back dimension of the vertical rack posts)
Side Clearance: 9.5mm
Appliances are shown for display purposes and are not included in the cost of the kit
Minimum slide dimensions without appliance installed (slides retracted):
20.9” x 1.6”
531 mm x 41 mm
Weight (rails only):
4.6 lbs. / 2.08 kg.
Dimensions with Netgate 8300 mounted (slides retracted and locked):
19 x 13 x 1.72 inches*
482.6 x 330 x 43.8 mm
17.93 lbs. / 8.13 kg.
*excluding system handles, and hot-swap PSU protrusions
WARRANTY AND SUPPORT INFORMATION:
One-year manufacturer's warranty information is here.
All specifications subject to change without notice.
PRO TIP
Take a photo of the label on the bottom of your Netgate appliance before installation. It is always a good idea to make a note of serial numbers and additional information from the label on the bottom of your system before installing in a server rack. The labeling may be difficult to read while the system is mounted in the rack. Please take a picture of the information or write it down for future reference.
ITG Shop is a trading name of IT and General Limited, registered in England and Wales with registered number: 09291031 and registered office: 20-22 Wenlock Road, London, N1 7GU. | VAT Reg. No: GB223541733
