The Teltonika RUTX12 is a dual LTE Cat-6 industrial router designed for critical connectivity where reliability and speed are essential. It integrates two cellular modems, enabling simultaneous mobile network connections that can be configured for load balancing or automatic failover, ensuring uninterrupted service.
The router also provides dual-band Wi-Fi 5 with MU-MIMO for strong wireless performance and multiple Gigabit Ethernet ports for flexible wired networking.
Built with a rugged aluminium housing and wide operating temperature support, it is well-suited for harsh industrial or remote environments.
Advanced software features such as VPN support, firewall protection, remote management, and automated SIM/network switching make it a versatile solution for enterprise, IoT, and industrial applications that demand always-on, resilient connectivity.
| Mobile module | 2 × 4G LTE Cat 6 up to 300 DL / 50 UL Mbps; 3G up to 42 DL / 5.76 UL Mbps |
| 3GPP Release | Release 12 |
| eSIM* | Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans *Feature availability varies by order code |
| SIM switch* | Dual SIM and eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection *Feature availability varies by order code |
| Status | IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, MNC |
| SMS | SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Block/Allow list | Operator block/allow list (by country or separate operators) |
| Multiple PDN | Possibility to use different PDNs for multiple network access and services |
| Band management | Band lock, Used band status display |
| SIM idle protection service | Periodically switch to the unused SIM and establish a data connection to prevent SIM blocking |
| SIM PIN code management | Set, change, or disable the SIM card PIN |
| APN | Auto APN |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
| Wireless mode | 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA) |
| Wi-Fi security | WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF) |
| SSID/ESSID | SSID stealth mode and access control based on MAC address |
| Wi-Fi users | Up to 150 simultaneous connections |
| Wireless Connectivity Features | Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k) |
| Wireless MAC filter | Allowlist, blocklist |
| Wireless QR code generator | Scan to automatically join the network without inputting credentials |
| TravelMate | Forward Wi-Fi hotspot landing page to a subsequent connected device |
| Bluetooth 4.0 | Bluetooth Low Energy (LE) for short-range communication |
| WAN | 1 × WAN port 10/100/1000 Mbps; IEEE 802.3, 802.3u, 802.3az; auto MDI/MDIX |
| LAN | 4 × LAN ports 10/100/1000 Mbps; IEEE 802.3, 802.3u, 802.3az; auto MDI/MDIX |
| Routing | Static routing; Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP); Policy-based routing |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN |
| VoIP passthrough support | H.323 and SIP-ALG protocol NAT helpers |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules, TTL target customisation |
| Firewall status page | View all firewall statistics, rules, and rule counters |
| Port management | View device ports; enable/disable; auto-configuration on/off; change speed |
| Network topology | Visual representation of your network and connected devices |
| Hotspot | Captive portal, internal/external RADIUS server, RADIUS MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, per-user/group limits, user management, 9 default customisable themes and ability to upload/download custom themes |
| DHCP | Static & dynamic IP allocation, DHCP relay, DHCP server configuration & status, static leases with MAC wildcards |
| QoS / Smart Queue Management (SQM) | Traffic priority by source/destination, service, protocol or port; WMM; 802.11e |
| DDNS | Supported >77 providers; manual configuration supported |
| DNS over HTTPS | DNS over HTTPS proxy |
| Network backup | Wi-Fi WAN, Mobile, VRRP, Wired options; automatic failover |
| Load balancing | Balance Internet traffic over multiple WAN connections |
| SSHFS | Mount remote file system via SSH protocol |
| VRF support | Initial virtual routing and forwarding (VRF) support |
| Traffic Management | Real-time monitoring, wireless signal charts, traffic usage history |
| 802.1x | Port-based network access control client |
| Authentication | Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS user authentication, IP & login attempts block, time-based login blocking, built-in random password generator |
| Firewall | Preconfigured rules via WebUI; unlimited configuration via CLI; DMZ, NAT, NAT-T, NAT64 |
| Attack prevention | DDoS prevention (SYN flood, SSH, HTTP/HTTPS), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan) |
| VLAN | Port and tag-based VLAN separation |
| Mobile quota control | Mobile data limit, customizable period, start time, warning limit, phone number |
| WEB filter | Blacklist for unwanted websites; Whitelist for allowed sites only |
| Access control | Flexible access control of SSH, Web interface, CLI and Telnet |
| TPM* | Identification and authentication module, TPM 2.0 standard *Feature availability varies by order code |
| SSL certificate generation | Let's Encrypt and SCEP certificate generation |
| OpenVPN | Multiple clients and a server can run simultaneously; 27 encryption methods |
| OpenVPN Encryption | DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC/CFB/CFB1/CFB8/OFB/GCM, AES-192-CFB/CFB1/CFB8/OFB/CBC/GCM, AES-256-GCM/CFB/CFB1/CFB8/OFB/CBC |
| IPsec | XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16) |
| GRE | GRE tunnel, GRE tunnel over IPsec support |
| PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support |
| Stunnel | TLS encryption wrapper proxy (adds TLS to existing clients/servers without code changes) |
| DMVPN | Scalable IPsec VPNs; Phase 2 & 3; Dual Hub support |
| SSTP | SSTP client instance support |
| ZeroTier | ZeroTier VPN client support |
| WireGuard | WireGuard VPN client and server support |
| Tinc | Encryption, authentication and compression; client & server support |
| Tailscale | Encrypted point-to-point connections using WireGuard; simpler than traditional VPNs |
| Supported modes | Client, Server |
| Supported connection types | TCP |
| Supported modes | Server, Client |
| Supported connection types | TCP, USB |
| Custom registers | MODBUS TCP custom register block requests (read/write to a file inside the router) |
| Supported data formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD, DCBA, CDAB, BADC), HEX, ASCII |
| Protocol | HTTP(S), MQTT, Azure MQTT |
| Data to server | Extract parameters from multiple sources and protocols, and send them to a single server; custom LUA scripting supported |
| Modbus MQTT Gateway | Send commands and receive data from MODBUS Server through MQTT broker |
| Supported modes | Station, Outstation |
| Supported connection | TCP, USB |
| DLMS Support | DLMS – standard protocol for utility meter data exchange |
| Supported modes | Client |
| Supported connection types | TCP, USB |
| Teltonika Networks Web API (beta) | Configurable endpoints to retrieve or change data (see developers documentation) |
| WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event/system/kernel logs, Internet status |
| FOTA | Firmware update from server, automatic notification |
| SSH | SSH (v1, v2) |
| SMS | SMS status, SMS configuration |
| Call | Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with timer, Wi-Fi on/off |
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
| MQTT | MQTT Broker, MQTT publisher |
| SNMP | SNMP (v1, v2, v3), SNMP Trap, brute-force protection |
| JSON-RPC | Management API over HTTP/HTTPS |
| RMS | Teltonika Remote Management System (RMS) |
| ThingWorx | Monitor WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
| Cumulocity – Cloud of Things | Monitor Device Model/Revision/Serial, WAN Type/IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength; reboot and firmware upgrade actions |
| Azure IoT Hub | Send parameters via Data to Server; Direct Methods (RutOS API); Plug & Play with Device Provisioning Service (zero-touch) |
| AWS IoT Core | Interact with AWS cloud platform; Jobs support to call device API |
| CPU | Quad-core ARM Cortex A7, 717 MHz |
| RAM | 256 MB DDR3 |
| FLASH storage | 256 MB SPI Flash |
| WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup |
| FOTA | Update FW |
| RMS | Update FW/configuration for multiple devices at once |
| Keep settings | Update FW without losing current configuration |
| Factory settings reset | Full factory reset restores all system settings to defaults |
| Operating system | RutOS (OpenWrt-based Linux OS) |
| Supported languages | Busybox shell, Lua, C, C++, Python, Java (via Package Manager) |
| Development tools | SDK package with build environment provided |
| GPL customization | Custom branded firmware and web page application (colours, logos, etc.) |
| Package Manager | Install additional software on the device |
| GNSS | GPS, GLONASS, BeiDou, Galileo, QZSS |
| Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS |
| NMEA | NMEA 0183 |
| NTRIP | NTRIP protocol (Networked Transport of RTCM via Internet Protocol) |
| Server software | TAVL, RMS |
| Geofencing | Configurable multiple geofence zones |
| Data rate | USB 2.0 |
| Applications | Samba share, USB-to-serial |
| External devices | External HDD, flash drive, additional modem, printer, USB-serial adapter |
| Storage formats | FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4 |
| Input | 1 × Digital Input, 0–6 V detected as low, 8–30 V detected as high |
| Output | 1 × Digital Output, open collector, max 30 V / 300 mA |
| Events | Email, RMS, SMS |
| I/O juggler | Configure I/O conditions to initiate events |
| Connector | 4-pin industrial DC power socket |
| Input voltage range | 9–50 VDC, reverse polarity protection, surge/transient protection |
| PoE (passive) | Possibility to power via LAN1 port, Mode B, 9–50 VDC (not compatible with IEEE 802.3af/at/bt) |
| Power consumption | Idle: < 4 W, Max: < 22 W |
| Ethernet | 5 × RJ45 ports, 10/100/1000 Mbps |
| I/Os | 1 × Digital Input, 1 × Digital Output on 4-pin power connector |
| Status LEDs | 4 × connection status, 6 × connection strength, 10 × Ethernet port status, 4 × WAN status, 1 × Power, 2 × 2.4G & 5G Wi-Fi LEDs |
| SIM | 2 × SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external holders |
| Power | 1 × 4-pin power connector |
| Antennas | 4 × SMA for LTE, 2 × RP-SMA for Wi-Fi, 1 × RP-SMA for Bluetooth, 1 × SMA for GNSS |
| USB | 1 × USB-A port for external devices |
| Reset | Reboot / User default reset / Factory reset button |
| Other | 1 × Grounding screw |
| Casing material | Full aluminium housing |
| Dimensions (W × H × D) | 132 × 44.2 × 95.1 mm |
| Weight | 540 g |
| Mounting options | DIN rail, wall mount, flat surface (kits required) |
| Operating temperature | -40 °C to 75 °C |
| Operating humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
| Regulatory | CE, UKCA, EAC, UCRF, CITC, ANRT, ICASA, NOM, Anatel, RCM, SIRIM, NTC, NBTC, CB, E-mark |
| Standards | EN 55032:2015; EN 55035:2017; EN IEC 61000-3-2:2019; EN 61000-3-3:2013 + A1:2019; EN 301 489-1 V2.2.3; EN 301 489-3 V2.1.1; EN 301 489-17 V3.2.4; EN 301 489-19 V2.1.1; Draft EN 301 489-52 V1.1.0 |
| ESD | EN 61000-4-2:2009 |
| Radiated Immunity | EN IEC 61000-4-3:2006 + A1:2008 + A2:2010 |
| EFT | EN 61000-4-4:2012 |
| Surge Immunity (AC Mains) | EN 61000-4-5:2014 + A1:2017 |
| CS | EN 61000-4-6:2014 |
| DIP | EN 61000-4-11:2004 + A1:2017 |
| Standards | EN 300 328:V2.2.2; EN 300 440:V2.2.1; EN 301 893 V2.1.1; EN 301 908-1:V13.1.1; EN 301 908-2:V13.1.1; EN 301 908-13:V13.1.1; EN 303 413 V1.1.1 |
| Standards | CE: EN IEC 62368-1:2020 + A11:2020; RCM: AS/NZS 62368.1:2018; CB: IEC 62368-1:2018 |
RUTX12 Flyer (EN) - Open Here
RUTX12 Datasheet (EN) - Open Here
RUTX12 Quick Start Guide (EN) - Open Here
Firmware Downloads - Open Here
RUTX12 User Manual - Open Here
Certifications & Approvals - Open Here
Product Change Notifications - Open Here
SDK Downloads - Open Here
GPL Downloads - Open Here
RUTX12 3D Models - Open Here
ITG Shop is a trading name of IT and General Limited, registered in England and Wales with registered number: 09291031 and registered office: 20-22 Wenlock Road, London, N1 7GU. | VAT Reg. No: GB223541733
